Hot-Dip Galvanized Steel Wire Rope
Hot-dip galvanized steel wire rope for stage rigging: corrosion-protected lifting and suspension line supplied on wooden reels and cut to the lengths the rigging layout requires. Pairs with turnbuckles, wire rope clamps and our winches and hoists.
Technical Specifications
Key Features
- Hot-dip galvanized wires resist rust through the full service life of the installation
- Lay and construction suited to hoisting and suspension duty
- Supplied on wooden reels, cut to the lengths your rigging layout needs
- Works with our winches, turnbuckles and clamps as one matched system
Related Products
Standard Groove Pulley
Cable Rewinder Box
Lighting Batten
The BRD hot-dip galvanized steel wire rope is the lifting line of the whole rigging system — the part that never gets attention until it rusts. Galvanizing the individual wires before cabling builds corrosion protection into the rope's full cross-section, not just its surface.
Where It Works
Lifting lines from winches and hoists to batten points; spot lines and diagonal bracing; permanent dead-hung suspensions in theatres, studios and school halls; outdoor stages and humid coastal venues where bright wire rope fails early.
Cut to Your Layout
Supplied on wooden reels and cut to the lengths the installation needs, with end terminations and matching turnbuckles, wire rope clamps and thimbles available from the same rigging package — one supplier, one load path.
BRD Technology manufactures stage rigging systems in China with 500+ installations across 14 countries and regions, supplying wire rope together with the hoists, clamps and tensioning hardware it works with.
The steel wire rope is the working line of a stage rigging system and is supplied matched to the drum and sheave of the hoist it runs on. Available as galvanized wire rope with certified breaking loads, terminals and thimbles, it is usually ordered together with our stage winches and rigging hardware.